Configuration
=============

.. warning::
    Be sure to set all configuration (in app.config["xxx"]) *PRIOR* to instantiating
    the Security class or calling security.init_app().

The following configuration values are used by Flask-Security:

Core
--------------

These configuration keys are used globally across all features.

.. py:data:: SECRET_KEY

    This is actually part of Flask - but is used by Flask-Security to sign all tokens.
    It is critical this is set to a strong value. For python3 consider using: ``secrets.token_urlsafe()``

.. py:data:: SECRET_KEY_FALLBACKS

    This is part of Flask (>=3.1) but can be used by Flask-Security to unsign tokens.
    See Flask documentation https://flask.palletsprojects.com/en/stable/config/#SECRET_KEY_FALLBACKS

    .. versionadded:: 5.6.0

.. py:data:: SECURITY_BLUEPRINT_NAME

    Specifies the name for the Flask-Security blueprint.

    Default: ``"security"``.

.. py:data:: SECURITY_URL_PREFIX

    Specifies the URL prefix for the Flask-Security blueprint.

    Default: ``None``.

.. py:data:: SECURITY_STATIC_FOLDER

    Specifies the folder name for static files (webauthn).

    Default: ``"static"``.

    .. versionadded:: 5.1.0

.. py:data:: SECURITY_STATIC_FOLDER_URL

    Specifies the URL for static files used by Flask-Security (webauthn).
    See Flask documentation https://flask.palletsprojects.com/en/latest/blueprints/#static-files

    Default: ``"/fs-static"``.

    .. versionadded:: 5.1.0

.. py:data:: SECURITY_SUBDOMAIN

    Specifies the subdomain for the Flask-Security blueprint. If your authenticated
    content is on a different subdomain, also enable :py:data:`SECURITY_REDIRECT_ALLOW_SUBDOMAINS`.

    Default: ``None``.
.. py:data:: SECURITY_FLASH_MESSAGES

    Specifies whether or not to flash messages for actions certain endpoint perform.
    Normally Flash-Security views will flash informational or error messages only when the operation
    results in a redirect.

    Default: ``True``.
.. py:data:: SECURITY_I18N_DOMAIN

    Specifies the name for domain used for translations.

    Default: ``"flask_security"``.
.. py:data:: SECURITY_I18N_DIRNAME

    Specifies the directory containing the ``MO`` files used for translations.
    When using flask-babel this can also be a list of directory names - this
    enables application to override a subset of messages if desired. The
    default ``builtin`` uses translations shipped with Flask-Security.

    Default: ``"builtin"``.

    .. versionchanged:: 5.2.0
        "builtin" is a special name which will be interpreted as the ``translations``
        directory within the installation of Flask-Security.

.. py:data:: SECURITY_TOKEN_AUTHENTICATION_KEY

    Specifies the query string parameter to read when using token authentication.

    Default: ``"auth_token"``.

.. py:data:: SECURITY_TOKEN_AUTHENTICATION_HEADER

    Specifies the HTTP header to read when using token authentication.

    Default: ``"Authentication-Token"``.

.. py:data:: SECURITY_TOKEN_MAX_AGE

    Specifies the number of seconds before an authentication token expires.

    Default: ``None``, meaning the token never expires.

.. py:data:: SECURITY_TOKEN_EXPIRE_TIMESTAMP

    A callable that returns a unix timestamp in the future when this specific
    authentication token should expire. Returning 0 means no expiration.
    It is passed the currently authenticated User so any fields can be used
    to customize an expiration time. Of course it is called in a request
    context so any information about the current request can also be used.

    If BOTH this and :data:`SECURITY_TOKEN_MAX_AGE` are set - the shorter is used.

    .. note::
        These 2 expiry options work differently - with this one, the actual expire
        timestamp is in the auth_token. The signed token (using itsdangerous)
        has the timestamp the token was generated. On validation, that is checked
        against ``SECURITY_TOKEN_MAX_AGE``. So for MAX_AGE, at the time of
        validation, the token hasn't yet been associated with a User.

    Default: ``lambda user: 0``

.. py:data:: SECURITY_EMAIL_VALIDATOR_ARGS

    Email address are validated and normalized via the ``mail_util_cls`` which
    defaults to :class:`.MailUtil`. That uses the `email_validator`_ package whose methods
    have configurable options - these can be set here and will be passed in.
    For example setting this to: ``{"check_deliverability": False}`` is useful
    when unit testing if the emails are fake.

    ``mail_util_cls`` has 2 methods - ``normalize`` and ``validate``. Both
    ensure the passed value is a valid email address, and returns a normalized
    version. ``validate`` additionally, by default, verifies that the email
    address can likely actually receive an email.

    Default: ``None``, meaning use the defaults from email_validator package.

    .. versionadded:: 4.0.0

.. _email_validator: https://pypi.org/project/email-validator/

.. py:data:: SECURITY_DEFAULT_HTTP_AUTH_REALM

    Specifies the default authentication realm when using basic HTTP auth.

    Default: ``Login Required``

.. py:data:: SECURITY_REDIRECT_BEHAVIOR

    Passwordless login, confirmation, reset password, unified signin, change_email, and oauth signin
    have GET endpoints that validate the passed token and redirect to an action form.
    For Single-Page-Applications style UIs which need to control their own internal URL routing these redirects
    need to not contain forms, but contain relevant information as query parameters.
    Setting this to ``"spa"`` will enable that behavior.

    When this is enabled, the following must also be defined:

    - :py:data:`SECURITY_POST_OAUTH_LOGIN_VIEW`  (if :py:data:`SECURITY_OAUTH_ENABLE` is True)
    - :py:data:`SECURITY_LOGIN_ERROR_VIEW`
    - :py:data:`SECURITY_CONFIRM_ERROR_VIEW`
    - :py:data:`SECURITY_POST_CHANGE_EMAIL_VIEW`
    - :py:data:`SECURITY_CHANGE_EMAIL_ERROR_VIEW`
    - :py:data:`SECURITY_POST_CONFIRM_VIEW`
    - :py:data:`SECURITY_RESET_ERROR_VIEW`
    - :py:data:`SECURITY_RESET_VIEW`


    Default: ``None`` which is existing html-style form redirects.

    .. versionadded:: 3.3.0

.. py:data:: SECURITY_REDIRECT_HOST

    Mostly for development purposes, the UI is often developed
    separately and is running on a different port than the
    Flask application. In order to test redirects, the `netloc`
    of the redirect URL needs to be rewritten. Setting this to e.g. `localhost:8080` does that.

    .. tip::
        Be aware that when this is set, any of the `*_VIEW` configuration variables that are set
        to URLs and not endpoints, will be redirected to this host.

    Default: ``None``.

    .. versionadded:: 3.3.0

.. py:data:: SECURITY_REDIRECT_ALLOW_SUBDOMAINS

    If ``True`` then subdomains (and the root domain) of the top-level host set
    by Flask's ``SERVER_NAME`` configuration will be allowed as post-view redirect targets.
    This is beneficial if you wish to place your authentication on one subdomain and
    authenticated content on another, for example ``auth.domain.tld`` and ``app.domain.tld``.

    Default: ``False``.

    .. versionadded:: 4.0.0

.. py:data:: SECURITY_REDIRECT_BASE_DOMAIN

    Set the base domain for checking allowable redirects. The intent here is to
    allow an application to be server on e.g. "flaskapp.my.org" and redirect
    to "myservice.my.org" (which maybe isn't a Flask app). Flask's SERVER_NAME
    can't be used to verify redirects in this case. Note that in most cases
    the application will want to set Flask's SESSION_COOKIE_DOMAIN to be this base domain -
    otherwise authorization information won't be sent.

    Default: ``None``

    .. versionadded:: 5.5.0

.. py:data:: SECURITY_REDIRECT_ALLOWED_SUBDOMAINS

    A list of subdomains. Each will be prepended to
    ``SECURITY_REDIRECT_BASE_DOMAIN`` and checked against the requested redirect.

    Default: ``[]``

    .. versionadded:: 5.5.0


.. note::
    The above 4 config options apply BOTH to the handling of ``next`` parameter
    as well as all the ``XXX_VIEW`` URL configuration options
    for those views that perform a redirect after processing.

.. py:data:: SECURITY_CSRF_PROTECT_MECHANISMS

    Authentication mechanisms that require CSRF protection.
    These are the same mechanisms as are permitted in the ``@auth_required`` decorator.

    Default: ``("basic", "session", "token")``.

.. py:data:: SECURITY_CSRF_IGNORE_UNAUTH_ENDPOINTS

    If ``True`` then CSRF will not be required for endpoints
    that don't require authentication (e.g. login, logout, register, forgot_password).

    Default: ``False``.

.. py:data:: SECURITY_CSRF_COOKIE_NAME

    The name for the CSRF cookie. This usually should be dictated by your
    client-side code  - more information can be found at :ref:`csrf_topic`

    Default: ``None`` - meaning no cookie will be sent.

.. py:data:: SECURITY_CSRF_COOKIE

    A dict that defines the parameters required to
    set a CSRF cookie.
    The complete set of parameters is described in Flask's `set_cookie`_ documentation.

    Default: ``{"samesite": "Strict", "httponly": False, "secure": False}``

    .. versionchanged:: 4.1.0
        The 'key' attribute was deprecated in favor of a separate configuration
        variable :data:`SECURITY_CSRF_COOKIE_NAME`.

.. py:data:: SECURITY_CSRF_HEADER

    The HTTP Header name that will contain the CSRF token. ``X-XSRF-Token``
    is used by packages such as `axios`_.

    Default: ``"X-XSRF-Token"``.

.. py:data:: SECURITY_CSRF_COOKIE_REFRESH_EACH_REQUEST

    By default, csrf_tokens have an expiration (controlled
    by the configuration variable ``WTF_CSRF_TIME_LIMIT``.
    This can cause CSRF failures if say an application is left
    idle for a long time. You can set that time limit to ``None``
    or have the CSRF cookie sent on every request (which will give
    it a new expiration time).

    Default: ``False``.

.. py:data:: SECURITY_SCRIPT_NONCE_KEY

    If set, adds a nonce attribute to all ``<script>`` tags rendered by Flask-Security.
    The nonce itself needs to be placed in the flask ``g`` context under the key defined here.
    This is useful when the Content Security Policy requires a nonce on script tags like::

        Content-Security-Policy: script-src 'nonce-{g.your-key}'

    Default: ``None``.

    .. versionadded:: 5.7.0

.. py:data:: SECURITY_EMAIL_SENDER

    Specifies the email address to send emails as.

    Default: value set to ``MAIL_DEFAULT_SENDER`` if Flask-Mail is used otherwise ``no-reply@localhost``.

.. py:data:: SECURITY_USER_IDENTITY_ATTRIBUTES

    Specifies which attributes of the user object can be used for credential validation.

    Defines the order and matching that will be applied when validating login
    credentials (either via standard login form or the unified sign in form).
    The identity field in the form will be matched in order using this configuration
    - the FIRST match will then be used to look up the user in the DB.

    Mapping functions take a single argument - ``identity`` from the form
    and should return ``None`` if the ``identity`` argument isn't in a format
    suitable for the attribute. If the ``identity`` argument format matches, it
    should be returned, optionally having had some normalization performed.
    The returned result will be used to look up the identity in the UserDataStore
    using the column name specified in the key.

    The provided :meth:`flask_security.uia_phone_mapper` for example performs
    phone number normalization using the ``phonenumbers`` package.

    .. tip::
        If your mapper performs any sort of normalization,
        make sure you apply the exact same transformation in your form validator
        when setting the field.

    .. danger::
        Make sure that any attributes listed here are marked Unique in your UserDataStore
        model.

    .. danger::
        Make sure your mapper methods guard against malicious user input. For example,
        if you allow ``username`` as an identity method you could use `bleach`_::

            def uia_username_mapper(identity):
                # we allow pretty much anything - but we bleach it.
                return bleach.clean(identity, strip=True)

    Default::

        [
            {"email": {"mapper": uia_email_mapper, "case_insensitive": True}},
        ]

    If you enable :py:data:`SECURITY_UNIFIED_SIGNIN` and set ``sms`` as a :py:data:`SECURITY_US_ENABLED_METHODS`
    and your `SECURITY_USER_IDENTITY_ATTRIBUTES` contained::

        [
            {"email": {"mapper": uia_email_mapper, "case_insensitive": True}},
            {"us_phone_number": {"mapper": uia_phone_mapper}},
        ]

    Then after the user sets up their SMS - they could login using their phone number and
    get a text with the authentication code.

    .. versionchanged:: 4.0.0
        Changed from list to list of dict.

.. _bleach: https://pypi.org/project/bleach/

.. py:data:: SECURITY_USER_IDENTITY_MAPPINGS

    .. versionadded:: 3.4.0
    .. deprecated:: 4.0.0
        Superseded by :py:data:`SECURITY_USER_IDENTITY_ATTRIBUTES`

.. py:data:: SECURITY_API_ENABLED_METHODS

    Various endpoints of Flask-Security require the caller to be authenticated.
    This variable controls which of the methods - ``token``, ``session``, ``basic``
    will be allowed. The default does NOT include ``basic`` since if ``basic``
    is in the list, and if the user is NOT authenticated, then the standard/required
    response of 401 with the ``WWW-Authenticate`` header is returned. This is
    rarely what the client wants.

    Default: ``["session", "token"]``.

    .. versionadded:: 4.0.0

.. py:data:: SECURITY_DEFAULT_REMEMBER_ME

    Specifies the default "remember me" value used when logging in a user.

    Default: ``False``.

.. py:data:: SECURITY_RETURN_GENERIC_RESPONSES

    If set to ``True`` Flask-Security will return generic responses to endpoints
    that could be used to enumerate users. Please see :ref:`generic_responses`.

    Default: ``False``

    .. versionadded:: 5.0.0

.. py:data:: SECURITY_FRESHNESS

    A timedelta used to protect endpoints that alter sensitive information.
    This is used to protect the following endpoints:

        - :py:data:`SECURITY_US_SETUP_URL`
        - :py:data:`SECURITY_TWO_FACTOR_SETUP_URL`
        - :py:data:`SECURITY_WAN_REGISTER_URL`
        - :py:data:`SECURITY_WAN_DELETE_URL`
        - :py:data:`SECURITY_MULTI_FACTOR_RECOVERY_CODES`
        - :py:data:`SECURITY_CHANGE_EMAIL_URL`

    Setting this to a negative number will disable any freshness checking and
    the endpoints:

        - :py:data:`SECURITY_VERIFY_URL`
        - :py:data:`SECURITY_US_VERIFY_URL`
        - :py:data:`SECURITY_US_VERIFY_SEND_CODE_URL`
        - :py:data:`SECURITY_WAN_VERIFY_URL`

    won't be registered.
    Setting this to 0 results in undefined behavior.
    Please see :meth:`flask_security.check_and_update_authn_fresh` for details.

    .. note::
        The timestamp of when the caller/user last successfully authenticated is
        stored in the session as well as authentication token.

    Default: timedelta(hours=24)

    .. versionadded:: 3.4.0

.. py:data:: SECURITY_FRESHNESS_GRACE_PERIOD

    A timedelta that provides a grace period when altering sensitive
    information. This ensures that multi-step operations don't get denied
    because the session/token happens to expire mid-step.

    Note that this is not implemented for freshness information carried in the
    auth token.

    N.B. To avoid strange behavior, be sure to set the grace period less than
    the freshness period.
    Please see :meth:`flask_security.check_and_update_authn_fresh` for details.

    Default: timedelta(hours=1)

    .. versionadded:: 3.4.0

.. py:data:: SECURITY_FRESHNESS_ALLOW_AUTH_TOKEN

    Controls whether the freshness data set in the auth token can be used to
    satisfy freshness checks. Some applications might want to force freshness
    protected endpoints to always use browser based access with sessions - they
    should set this to ``False``.

    Default: ``True``


    .. versionadded:: 5.5.0

Core - Passwords and Tokens
----------------------------
.. py:data:: SECURITY_PASSWORD_HASH

    Specifies the password hash algorithm to use when hashing passwords.
    Recommended values for production systems are ``argon2``, ``bcrypt``, or
    ``pbkdf2_sha512``. Some algorithms require the installation  of a backend package (e.g. `bcrypt`_, `argon2`_).

    Default: ``"argon2"``.

    .. versionchanged:: 5.5.0
        Default changed from ``bcrypt`` to ``argon2``.

.. py:data:: SECURITY_PASSWORD_SCHEMES

    List of supported password hash algorithms. ``SECURITY_PASSWORD_HASH``
    must be from this list. Passwords encrypted with any of these schemes will be honored.
    This is passed directly to `passlib's CryptoContext`_.

.. py:data:: SECURITY_DEPRECATED_PASSWORD_SCHEMES

    List of password hash algorithms that are considered weak and
    will be accepted, however on first use, will be re-hashed to the current
    setting of ``SECURITY_PASSWORD_HASH``.
    This is passed directly to `passlib's CryptoContext`_.

    Default: ``["auto"]`` which means any password found that wasn't
    hashed using ``SECURITY_PASSWORD_HASH`` will be re-hashed.

.. py:data:: SECURITY_PASSWORD_SALT

    Specifies the HMAC salt. This is required for all schemes that
    are configured for double hashing. A good salt can be generated using:
    ``secrets.SystemRandom().getrandbits(128)``.

    Default: ``None``.

.. py:data:: SECURITY_PASSWORD_SINGLE_HASH

    A list of schemes that should not be hashed twice. By default, passwords are
    hashed twice, first with :py:data:`SECURITY_PASSWORD_SALT`, and then with a random salt.

    Default: a list of known schemes not working with double hashing (`django_{digest}`, `plaintext`).

.. py:data:: SECURITY_HASHING_SCHEMES

    List of algorithms used for encrypting/hashing sensitive data within a token
    (Such as is sent with confirmation or reset password).
    This is passed directly to `passlib's CryptoContext`_.

    Default: ``["sha256_crypt", "hex_md5"]``.
.. py:data:: SECURITY_DEPRECATED_HASHING_SCHEMES

    List of deprecated algorithms used for creating and validating tokens.
    This is passed directly to `passlib's CryptoContext`_.

    Default: ``["auto"]``.

.. versionchanged:: 5.5.0
        Default changed from ``hex_md5`` to ``auto``.

.. py:data:: SECURITY_PASSWORD_HASH_OPTIONS

    Specifies additional options to be passed to the hashing method. This is deprecated as of passlib 1.7.

    .. deprecated:: 3.4.0 see: :py:data:`SECURITY_PASSWORD_HASH_PASSLIB_OPTIONS`

.. py:data:: SECURITY_PASSWORD_HASH_PASSLIB_OPTIONS

    Pass additional options through ``passlib`` to the various hashing methods.
    This is a dict of the form ``{<scheme>__<option>: <value>, ..}``
    e.g. {"argon2__time_cost": 3}.

    Default: ``{}``

    .. versionadded:: 3.3.1

.. py:data:: SECURITY_PASSWORD_LENGTH_MIN

    Minimum required length for passwords.

    Default: ``8``

    .. versionadded:: 3.4.0
.. py:data:: SECURITY_PASSWORD_COMPLEXITY_CHECKER

    Set to complexity checker to use (Only ``zxcvbn`` supported).

    Default: ``None``

    .. versionadded:: 3.4.0
.. py:data:: SECURITY_ZXCVBN_MINIMUM_SCORE

    Required ``zxcvbn`` password complexity score (0-4).
    Refer to https://github.com/dropbox/zxcvbn#usage for exact meanings of
    different score values.

    Default: ``3`` (Good or Strong)

    .. versionadded:: 5.0.0
.. py:data:: SECURITY_PASSWORD_CHECK_BREACHED

    If not ``None`` new/changed passwords will be checked against the
    database of breached passwords at https://api.pwnedpasswords.com.
    If set to ``strict`` then if the site can't be reached, validation will fail.
    If set to ``best-effort`` failure to reach the site will continue
    with the rest of password validation.

    Default: ``None``

    .. versionadded:: 3.4.0
.. py:data:: SECURITY_PASSWORD_BREACHED_COUNT

    Passwords with counts greater than or equal to this value are considered breached.

    Default: 1  - which might be to burdensome for some applications.

    .. versionadded:: 3.4.0

.. py:data:: SECURITY_PASSWORD_NORMALIZE_FORM

    Passwords are normalized prior to changing or comparing. This satisfies
    the NIST requirement: `5.1.1.2 Memorized Secret Verifiers`_.
    Normalization is performed using the Python unicodedata.normalize() method.

    Default: ``"NFKD"``

    .. versionadded:: 4.0.0

.. _5.1.1.2 Memorized Secret Verifiers: https://pages.nist.gov/800-63-3/sp800-63b.html#sec5

.. py:data:: SECURITY_PASSWORD_REQUIRED

    If set to ``False`` then a user can register with an empty password.
    This requires :py:data:`SECURITY_UNIFIED_SIGNIN` to be enabled. By
    default, the user will be able to authenticate using an email link.
    Please note: this does not mean a user can sign in with an empty
    password - it means that they must have some OTHER means of authenticating.

    Default: ``True``

    .. versionadded:: 5.0.0

.. py:data:: SECURITY_PASSWORD_CONFIRM_REQUIRED

    If set to ``True`` then during registration a 'password confirmation' field is presented.
    N.B. this just applies to the new(er) RegisterFormV2 (see :py:data:`SECURITY_USE_REGISTER_V2`)

    Default: ``True``

    .. versionadded:: 5.6.0

Core - Multi-factor
-------------------
These are used by the Two-Factor and Unified Signin features.

.. py:data:: SECURITY_TOTP_SECRETS

    Secret used to encrypt the totp_password both into DB and into the session cookie.
    Best practice is to set this to:

    .. code-block:: python

        from passlib import totp
        "{1: <result of totp.generate_secret()>}"

    See: `Totp`_ for details.

    .. versionadded:: 3.4.0

.. py:data:: SECURITY_TOTP_ISSUER

    Specifies the name of the service or application that the user is authenticating to.
    This will be the name displayed by most authenticator apps.

    Default: ``None``.

    .. versionadded:: 3.4.0

.. py:data:: SECURITY_SMS_SERVICE

    Specifies the name of the sms service provider. Out of the box
    "Twilio" is supported. For other sms service providers you will need
    to subclass :class:`.SmsSenderBaseClass` and register it:

    .. code-block:: python

        SmsSenderFactory.senders[<service-name>] = <service-class>

    Default: ``Dummy`` which does nothing.

    .. versionadded:: 3.4.0

.. py:data:: SECURITY_SMS_SERVICE_CONFIG

    Specifies a dictionary of basic configurations needed for use of a sms service.
    For "Twilio" the following keys are required (fill in from your Twilio dashboard):

    Default: ``{'ACCOUNT_SID': NONE, 'AUTH_TOKEN': NONE, 'PHONE_NUMBER': NONE}``

    .. versionadded:: 3.4.0

.. py:data:: SECURITY_PHONE_REGION_DEFAULT

    Assigns a default 'region' for phone numbers used for two-factor or
    unified sign in. All other phone numbers will require a region prefix to
    be accepted.

    Default: ``"US"``

    .. versionadded:: 3.4.0

Core - Compatibility
---------------------
These are flags that change various backwards compatability functionality.

.. py:data:: SECURITY_ANONYMOUS_USER_DISABLED

    If set to `True` then :data:`flask_security.current_user` will be `None` for unauthenticated
    users instead of pointing to an AnonymousUser object. Note that Flask-Login intends
    to deprecate the entire AnonymousUser concept.

    Default: ``False``.

    .. versionadded:: 5.4.0

.. py:data:: SECURITY_BACKWARDS_COMPAT_AUTH_TOKEN

    If set to ``True`` then an Authentication-Token will be returned
    on every successful call to login, reset-password, change-password
    as part of the JSON response. This was the default prior to release 3.3.0
    - however sending Authentication-Tokens (which by default don't expire)
    to session based UIs is a bad security practice.

    Default: ``False``.

Core - rarely need changing
----------------------------

.. py:data:: SECURITY_DATETIME_FACTORY

    Specifies the default datetime factory. The default is naive-UTC which
    corresponds to many DB's DateTime type.

    Default:``flask_security.naive_utcnow``.

.. py:data:: SECURITY_CONFIRM_SALT

    Specifies the salt value when generating confirmation links/tokens.

    Default: ``"confirm-salt"``.

.. py:data:: SECURITY_RESET_SALT

    Specifies the salt value when generating password reset links/tokens.

    Default: ``"reset-salt"``.

.. py:data:: SECURITY_LOGIN_SALT

    Specifies the salt value when generating login links/tokens.

    Default: ``"login-salt"``.

.. py:data:: SECURITY_REMEMBER_SALT

    Specifies the salt value when generating remember tokens.
    Remember tokens are used instead of user ID's as it is more secure.

    Default: ``"remember-salt"``.
.. py:data:: SECURITY_TWO_FACTOR_VALIDITY_SALT

    Specifies the salt value when generating two-factor validity tokens.

    Default: ``"tf-validity-salt"``.
.. py:data:: SECURITY_US_SETUP_SALT

    Default: ``"us-setup-salt"``

.. py:data:: SECURITY_WAN_SALT

    Default: ``"wan-salt"``
.. py:data:: SECURITY_TWO_FACTOR_SETUP_SALT

    Default: ``"tf-setup-salt"``
.. py:data:: SECURITY_EMAIL_CHANGE_SALT

    Specifies the salt value when generating change email confirmation links/tokens.

    Default: ``"change-email-salt"``.

.. py:data:: SECURITY_EMAIL_PLAINTEXT

    Sends email as plaintext using ``*.txt`` template.

    Default: ``True``.

.. py:data:: SECURITY_EMAIL_HTML

    Sends email as HTML using ``*.html`` template.

    Default: ``True``.

.. py:data:: SECURITY_CLI_USERS_NAME

    Specifies the name for the command managing users. Disable by setting ``False``.

    Default: ``"users"``.

.. py:data:: SECURITY_CLI_ROLES_NAME

    Specifies the name for the command managing roles. Disable by setting ``False``.

    Default: ``"roles"``.

.. py:data:: SECURITY_JOIN_USER_ROLES

    Specifies whether to set the ``UserModel.roles`` loading relationship to ``joined`` when a ``roles`` attribute
    is present for a SQLAlchemy Datastore. Setting this to ``False`` restores pre 3.3.0 behavior and is required if the ``roles`` attribute
    is not a joinable attribute on the ``UserModel``. The default setting improves performance by only requiring a single
    DB call.

    Default: ``True``.

    .. versionadded:: 3.4.0

.. _Totp: https://passlib.readthedocs.io/en/stable/narr/totp-tutorial.html#totp-encryption-setup
.. _set_cookie: https://flask.palletsprojects.com/en/1.1.x/api/?highlight=set_cookie#flask.Response.set_cookie
.. _axios: https://github.com/axios/axios
.. _bcrypt: https://pypi.org/project/bcrypt/
.. _argon2: https://pypi.org/project/argon2-cffi/

Login/Logout
------------
.. py:data:: SECURITY_LOGIN_URL

    Specifies the login URL.

    Default: ``"/login"``.

.. py:data:: SECURITY_LOGOUT_URL

    Specifies the logout URL.

    Default:``"/logout"``.


.. py:data:: SECURITY_LOGOUT_METHODS

    Specifies the HTTP request methods that the logout URL accepts. Specify ``None`` to disable the logout URL (and implement your own).
    Configuring with just ``["POST"]`` is slightly more secure. The default includes ``"GET"`` for backwards compatibility.

    Default: ``["GET", "POST"]``.


.. py:data:: SECURITY_POST_LOGIN_VIEW

    Specifies the default view to redirect to after a user logs in. This value can be set to a URL
    or an endpoint name. Defaults to the Flask config ``APPLICATION_ROOT`` value which itself defaults to ``"/"``.
    Note that if the request URL or form has a ``next`` parameter, that will take precedence.

    Default: ``APPLICATION_ROOT``.

.. py:data:: SECURITY_POST_LOGOUT_VIEW

    Specifies the default view to redirect to after a user logs out. This value can be set to a URL
    or an endpoint name. Defaults to the Flask config ``APPLICATION_ROOT`` value which itself defaults to ``"/"``.
    Note that if the request URL or form has a ``next`` parameter, that will take precedence.

    Default: ``APPLICATION_ROOT``.


.. py:data:: SECURITY_UNAUTHORIZED_VIEW

    Specifies the view to redirect to if a user attempts to access a URL/endpoint that they do
    not have permission to access. This can be a callable (which returns a URL or ``None``) or an endpoint or a URL.
    If this value is ``None`` or the configured callable returns ``None`` or empty, the user is presented with a default HTTP 403 response.

    Default: ``None``.

.. py:data:: SECURITY_LOGIN_USER_TEMPLATE

    Specifies the path to the template for the user login page.

    Default: ``"security/login_user.html"``.

.. py:data:: SECURITY_VERIFY_URL

    Specifies the reauthenticate URL. If :py:data:`SECURITY_FRESHNESS` evaluates to < 0; this
    endpoint won't be registered.

    Default: ``"/verify"``

    .. versionadded:: 3.4.0


.. py:data:: SECURITY_VERIFY_TEMPLATE

    Specifies the path to the template for the verify password page.

    Default: ``"security/verify.html"``.

    .. versionadded:: 3.4.0

.. py:data:: SECURITY_POST_VERIFY_URL

    Specifies the default view to redirect to after a user successfully reauthenticates either via
    the :py:data:`SECURITY_VERIFY_URL` or the :py:data:`SECURITY_US_VERIFY_URL`.
    Normally this won't need to be set and after the verification/reauthentication, the referring
    view (held in the ``next`` parameter) will be redirected to.

    Default: ``None``.

    .. versionadded:: 3.4.0

Registerable
------------
.. py:data:: SECURITY_REGISTERABLE

    Specifies if Flask-Security should create a user registration endpoint.

    Default: ``False``

.. py:data:: SECURITY_SEND_REGISTER_EMAIL

    Specifies whether registration email is sent.

    Default: ``True``.
.. py:data:: SECURITY_EMAIL_SUBJECT_REGISTER

    Sets the subject for the confirmation email.

    Default: ``_("Welcome")``.
.. py:data:: SECURITY_REGISTER_USER_TEMPLATE

    Specifies the path to the template for the user registration page.

    Default: ``"security/register_user.html"``.
.. py:data:: SECURITY_POST_REGISTER_VIEW

    Specifies the view to redirect to after a user successfully registers.
    This value can be set to a URL or an endpoint name. If this value is
    ``None``, the user is redirected to the value of :data:`SECURITY_POST_LOGIN_VIEW`.
    Note that if the request URL or form has a ``next`` parameter, that will take precedence.

    Default: ``None``.
.. py:data:: SECURITY_REGISTER_URL

    Specifies the register URL.

    Default: ``"/register"``.

.. py:data:: SECURITY_USERNAME_ENABLE

    If set to True, the default registration form and template, and
    login form and template will have
    a username field added. This requires that your user model contain the
    field ``username``. It MUST be set as 'unique' and if you don't want
    to require a username, it should be set as 'nullable'.
    The form validators will call :meth:`.UsernameUtil.validate`.

    In addition, :data:`SECURITY_USER_IDENTITY_ATTRIBUTES` will be updated to include::

        {"username": {"mapper": uia_username_mapper}, "case_insensitive": True}

    See :meth:`flask_security.uia_username_mapper` for details.

    If you already have added a username field to your forms, don't set this
    option - the system will throw an exception at init_app time.

    Validation and normalization is encapsulated in :class:`.UsernameUtil`.
    Note that the default validation restricts username input to be unicode
    letters and numbers. It also uses ``bleach`` to scrub any risky input. Be
    sure your application requirements includes `bleach`_.

    Default: ``False``

    .. versionadded:: 4.1.0

.. py:data:: SECURITY_USERNAME_REQUIRED

    If username is enabled, is it required as part of registration?

    Default: ``False``

    .. versionadded:: 4.1.0


.. py:data:: SECURITY_USERNAME_MIN_LENGTH

    Minimum length of a username.

    Default: ``4``

    .. versionadded:: 4.1.0

.. py:data:: SECURITY_USERNAME_MAX_LENGTH

    Maximum length of a username.

    Default: ``32``

    .. versionadded:: 4.1.0

.. py:data:: SECURITY_USERNAME_NORMALIZE_FORM

    Usernames, by default, are normalized using the Python unicodedata.normalize() method.

    Default: ``"NFKD"``

    .. versionadded:: 4.1.0

.. py:data:: SECURITY_USE_REGISTER_V2

    The :py:class:`flask_security.RegisterFormV2` is a single form used for registration. This is replacing the
    RegisterForm and ConfirmRegisterForm (over a few releases). Setting this option
    to ``False`` will revert behavior to prior releases with register_form=RegisterForm and
    confirm_register_form=ConfirmRegisterForm. Note that this
    option is ignored if the application has sub-classed the registration form.

    Default: ``True``

    .. versionadded:: 5.6.0
    .. versionchanged:: 5.7.0
      Default set to ``True``
    .. deprecated:: 5.7.0
      In a future release the old RegisterForm and ConfirmRegisterForm will be removed which
      will make this option obsolete.



Confirmable
-----------

.. py:data:: SECURITY_CONFIRMABLE

    Specifies if users are required to confirm their email address when
    registering a new account. If this value is `True`, Flask-Security creates an endpoint to handle
    confirmations and requests to resend confirmation instructions.

    Default: ``False``.
.. py:data:: SECURITY_CONFIRM_EMAIL_WITHIN

    Specifies the amount of time a user has before their confirmation
    link expires. Always pluralize the time unit for this value.

    Default: ``"5 days"``.
.. py:data:: SECURITY_CONFIRM_URL

    Specifies the email confirmation URL.

    Default: ``"/confirm"``.
.. py:data:: SECURITY_SEND_CONFIRMATION_TEMPLATE

    Specifies the path to the template for the resend confirmation instructions page.

    Default: ``"security/send_confirmation.html"``.
.. py:data:: SECURITY_EMAIL_SUBJECT_CONFIRM

    Sets the subject for the email confirmation message.

    Default: ``_("Please confirm your email")``.
.. py:data:: SECURITY_CONFIRM_ERROR_VIEW

    Specifies the view to redirect to if a confirmation error occurs.
    This value can be set to a URL or an endpoint name.
    If this value is ``None``, the user is presented the default view
    to resend a confirmation link. In the case of :py:data:`SECURITY_REDIRECT_BEHAVIOR` == ``"spa"``
    query params in the redirect will contain the error.

    Default: ``None``.
.. py:data:: SECURITY_POST_CONFIRM_VIEW

    Specifies the view to redirect to after a user successfully confirms their email.
    This value can be set to a URL or an endpoint name. If this value is ``None``, the user is redirected to the
    value of :data:`SECURITY_POST_LOGIN_VIEW`.

    Default: ``None``.
.. py:data:: SECURITY_AUTO_LOGIN_AFTER_CONFIRM

    If ``True``, then the user corresponding to the confirmation token will be automatically signed in.
    If ``False`` (the default) then the user will be required to authenticate using the usual mechanism(s).
    Note that the confirmation token is single-use. This is not recommended by OWASP
    however an application that is by invite only (no self-registration) might find this useful.

    Default: ``False``.

.. py:data:: SECURITY_LOGIN_WITHOUT_CONFIRMATION

    Specifies if a user may login before confirming their email when
    the value of :data:`SECURITY_CONFIRMABLE` is set to ``True``.

    Default: ``False``.
.. py:data:: SECURITY_REQUIRES_CONFIRMATION_ERROR_VIEW

    Specifies a redirect page if the users tries to login, reset password or us-signin with an unconfirmed account.
    If an URL endpoint is specified, flashes an error messages and redirects.
    Default behavior is to reload the form with an error message without redirecting to an other page.

    Default: ``None``.

Changeable
----------

.. py:data:: SECURITY_CHANGEABLE

    Specifies if Flask-Security should enable the change password endpoint.

    Default: ``False``.
.. py:data:: SECURITY_CHANGE_URL

    Specifies the password change URL.

    Default: ``"/change"``.
.. py:data:: SECURITY_POST_CHANGE_VIEW

    Specifies the view to redirect to after a user successfully changes their password.
    This value can be set to a URL or an endpoint name.
    If this value is ``None``, the user is redirected  to the
    value of :data:`SECURITY_POST_LOGIN_VIEW`.

    Default: ``None``.
.. py:data:: SECURITY_CHANGE_PASSWORD_TEMPLATE

    Specifies the path to the template for the change password page.

    Default: ``"security/change_password.html"``.

.. py:data:: SECURITY_SEND_PASSWORD_CHANGE_EMAIL

    Specifies whether password change email is sent.

    Default: ``True``.

.. py:data:: SECURITY_EMAIL_SUBJECT_PASSWORD_CHANGE_NOTICE

    Sets the subject for the password change notice.

    Default: ``_("Your password has been changed")``.

Recoverable
-----------

.. py:data:: SECURITY_RECOVERABLE

    Specifies if Flask-Security should create a password reset/recover endpoint.

    Default: ``False``.

.. py:data:: SECURITY_RESET_URL

    Specifies the password reset URL.

    Default: ``"/reset"``.

.. py:data:: SECURITY_RESET_PASSWORD_TEMPLATE

    Specifies the path to the template for the reset password page.

    Default: ``"security/reset_password.html"``.

.. py:data:: SECURITY_FORGOT_PASSWORD_TEMPLATE

    Specifies the path to the template for the forgot password page.

    Default: ``"security/forgot_password.html"``.

.. py:data:: SECURITY_POST_RESET_VIEW

    Specifies the view to redirect to after a user successfully resets their password.
    This value can be set to a URL or an endpoint name. If this
    value is ``None``, the user is redirected to the value of ``.login`` if
    :py:data:`SECURITY_AUTO_LOGIN_AFTER_RESET` is ``False`` or :py:data:`SECURITY_POST_LOGIN_VIEW`
    if ``True``

    Default: ``None``.

.. py:data:: SECURITY_RESET_VIEW

    Specifies the view/URL to redirect to after a GET reset-password link.
    This is only valid if :py:data:`SECURITY_REDIRECT_BEHAVIOR` == ``"spa"``.
    Query params in the redirect will contain the ``token``.

    Default: ``None``.

.. py:data:: SECURITY_AUTO_LOGIN_AFTER_RESET

    If ``False`` then on successful reset the user will be required to signin again.
    Note that the reset token is not valid after being used once.
    If ``True``, then the user corresponding to the
    reset token will be automatically signed in. Note: auto-login is contrary
    to OWASP best security practices. This option is for backwards compatibility
    and is deprecated.

    Default: ``False``.

    .. versionadded:: 5.3.0
    .. deprecated:: 5.3.0

.. py:data:: SECURITY_RESET_ERROR_VIEW

    Specifies the view/URL to redirect to after a GET reset-password link when there is an error.
    This is only valid if :py:data:`SECURITY_REDIRECT_BEHAVIOR` == ``spa``.
    Query params in the redirect will contain the error.

    Default: ``None``.

.. py:data:: SECURITY_RESET_PASSWORD_WITHIN

    Specifies the amount of time a user has before their password reset link expires.
    Always pluralize the time unit for this value.

    Default: ``"1 days"``.

.. py:data:: SECURITY_SEND_PASSWORD_RESET_EMAIL

    Specifies whether password reset email is sent. These are instructions
    including a link that can be clicked on.

    Default: ``True``.

.. py:data:: SECURITY_SEND_PASSWORD_RESET_NOTICE_EMAIL

    Specifies whether password reset notice email is sent. This is sent once
    a user's password was successfully reset.

    Default: ``True``.

.. py:data:: SECURITY_EMAIL_SUBJECT_PASSWORD_RESET

    Sets the subject for the password reset email.

    Default: ``_("Password reset instructions")``.

.. py:data:: SECURITY_EMAIL_SUBJECT_PASSWORD_NOTICE

    Sets subject for the password notice.

    Default: ``_("Your password has been reset")``.

Change-Email
------------
.. versionadded:: 5.5.0

.. py:data:: SECURITY_CHANGE_EMAIL

    It ``True`` an endpoint is created that allows a user to change their email address.

    Default: ``False``
.. py:data:: SECURITY_CHANGE_EMAIL_SUBJECT

    Sets the subject for the change email confirmation email.

    Default: ``_("Confirm your new email address")``.
.. py:data:: SECURITY_CHANGE_EMAIL_TEMPLATE

    Specifies the path to the template for the change email page.

    Default: ``"security/change_email.html"``.
.. py:data:: SECURITY_CHANGE_EMAIL_WITHIN

    Specifies the amount of time a user has before their change email
    token expires. Always pluralize the time unit for this value.

    Default: ``"2 hours"``
.. py:data:: SECURITY_POST_CHANGE_EMAIL_VIEW

    Specifies the view to redirect to after a user successfully confirms their new email address.
    This value can be set to a URL or an endpoint name. If this value is
    ``None``, the user is redirected to the value of :py:data:`SECURITY_POST_LOGIN_VIEW`.
    Note that if the request URL or form has a ``next`` parameter, that will take precedence.
    In the case of :py:data:`SECURITY_REDIRECT_BEHAVIOR` == ``"spa"`` this value must be set.

    Default: ``None``.
.. py:data:: SECURITY_CHANGE_EMAIL_ERROR_VIEW

    Specifies the view to redirect to if a change email confirmation error occurs.
    This value can be set to a URL or an endpoint name.
    If this value is ``None``, the user is redirected back to the change_email page.
    In the case of :py:data:`SECURITY_REDIRECT_BEHAVIOR` == ``"spa"``
    this value must be set, and the query params in the redirect will contain the error.

    Default: ``None``.
.. py:data:: SECURITY_CHANGE_EMAIL_URL

    Specifies the change-email endpoint URL.

    Default: ``"/change-email"``.
.. py:data:: SECURITY_CHANGE_EMAIL_CONFIRM_URL

    Specifies the change-email confirmation endpoint URL. This is a GET
    only endpoint (accessed via a link in an email).

    Default: ``"/change-email-confirm"``.

Additional relevant configuration variables:

    - :py:data:`SECURITY_FRESHNESS` - Used to protect /change-email.
    - :py:data:`SECURITY_FRESHNESS_GRACE_PERIOD` - Used to protect /change-email.

Two-Factor
-----------
Configuration related to the two-factor authentication feature.

.. versionadded:: 3.2.0

.. py:data:: SECURITY_TWO_FACTOR

    Specifies if Flask-Security should enable the two-factor login feature.
    If set to ``True``, in addition to their passwords, users will be required to
    enter a code that is sent to them. Note that unless
    :data:`SECURITY_TWO_FACTOR_REQUIRED` is set - this is opt-in.

    Default: ``False``.
.. py:data:: SECURITY_TWO_FACTOR_REQUIRED

    If set to ``True`` then all users will be required to setup and use two-factor authorization.

    Default: ``False``.
.. py:data:: SECURITY_TWO_FACTOR_ENABLED_METHODS

    Specifies the default enabled methods for two-factor authentication.

    Default: ``['email', 'authenticator', 'sms']`` which are the only currently supported methods.
.. py:data:: SECURITY_TWO_FACTOR_AUTHENTICATOR_VALIDITY

    Specifies the number of seconds access token is valid.

    Default: ``120``.
.. py:data:: SECURITY_TWO_FACTOR_MAIL_VALIDITY

    Specifies the number of seconds access token is valid.

    Default: ``300``.
.. py:data:: SECURITY_TWO_FACTOR_SMS_VALIDITY

    Specifies the number of seconds access token is valid.

    Default: ``120``.
.. py:data:: SECURITY_TWO_FACTOR_SETUP_WITHIN

    Specifies the amount of time a user has before their two-factor setup
    token expires. Always pluralize the time unit for this value.

    Default: ``"30 minutes"``

    .. versionadded:: 5.5.0
.. py:data:: SECURITY_TWO_FACTOR_RESCUE_MAIL

    Specifies the email address users send mail to when they can't complete the
    two-factor authentication login.

    Default: ``"no-reply@localhost"``.

.. py:data:: SECURITY_EMAIL_SUBJECT_TWO_FACTOR

    Sets the subject for the two-factor feature.

    Default: ``_("Two-Factor Login")``
.. py:data:: SECURITY_EMAIL_SUBJECT_TWO_FACTOR_RESCUE

    Sets the subject for the two-factor help function.

    Default: ``_("Two-Factor Rescue")``
.. py:data:: SECURITY_TWO_FACTOR_VERIFY_CODE_TEMPLATE

    Specifies the path to the template for the verify code page for the two-factor authentication process.

    Default: ``"security/two_factor_verify_code.html"``.
.. py:data:: SECURITY_TWO_FACTOR_SETUP_TEMPLATE

    Specifies the path to the template for the setup page for the two-factor authentication process.

    Default: ``"security/two_factor_setup.html"``.

.. py:data:: SECURITY_TWO_FACTOR_SETUP_URL

    Specifies the two-factor setup URL.

    Default: ``"/tf-setup"``.
.. py:data:: SECURITY_TWO_FACTOR_TOKEN_VALIDATION_URL

    Specifies the two-factor token validation URL.

    Default: ``"/tf-validate"``.

.. py:data:: SECURITY_TWO_FACTOR_RESCUE_URL

    Specifies the two-factor rescue URL.

    Default: ``"/tf-rescue"``.

.. py:data:: SECURITY_TWO_FACTOR_SELECT_URL

    Specifies the two-factor select URL. This is used when the user has
    setup more than one second factor.

    Default: ``"/tf-select"``.

    .. versionadded:: 5.0.0

.. py:data:: SECURITY_TWO_FACTOR_ERROR_VIEW

    Specifies a URL or endpoint to redirect to if the system detects that
    a two-factor endpoint is being accessed without the proper state. For example
    if ``tf-validate`` is accessed but the caller hasn't yet successfully passed the
    primary authentication.

    Default: ``".login"``

    .. versionadded:: 5.1.0

.. py:data:: SECURITY_TWO_FACTOR_POST_SETUP_VIEW

    Specifies the view to redirect to after a user successfully setups a two-factor method (non-json).
    This value can be set to a URL or an endpoint name.

    Default: ``".two_factor_setup"``

    .. versionadded:: 5.1.0

.. py:data:: SECURITY_TWO_FACTOR_SELECT_TEMPLATE

    Specifies the path to the template for the select method page for the two-factor authentication process.
    This is used when more than one two-factor method has been setup (e.g. SMS and Webauthn).

    Default: ``"security/two_factor_select.html"``.

    .. versionadded:: 5.0.0

.. py:data:: SECURITY_TWO_FACTOR_ALWAYS_VALIDATE

    Specifies whether the application should require a two-factor code upon every login.
    If set to ``False`` then the 2 values below are used to determine when
    a code is required. Note that this is cookie based - so a new browser
    session will always require a fresh two-factor code.

    Default: ``True``.
.. py:data:: SECURITY_TWO_FACTOR_LOGIN_VALIDITY

    Specifies the expiration of the two-factor validity cookie and verification of the token.

    Default: ``"30 Days"``.


.. py:data:: SECURITY_TWO_FACTOR_VALIDITY_COOKIE

    A dictionary containing the parameters of the two-factor validity cookie.
    The complete set of parameters is described in Flask's `set_cookie`_ documentation.

    Default: ``{'httponly': True, 'secure': False, 'samesite': None}``.

.. py:data:: SECURITY_TWO_FACTOR_IMPLEMENTATIONS

    A dictionary of supported second factor implementations. All of these must
    implement the TfPluginBase interface.

    Default: ``{"code": "flask_security.twofactor.CodeTfPlugin", "webauthn": "flask_security.webauthn.WebAuthnTfPlugin",}``

    .. versionadded:: 5.0.0

.. py:data:: SECURITY_TWO_FACTOR_RESCUE_EMAIL

    If True, then the 'email' option for two-factor rescue is enabled - allowing a user to
    recover a missing/inoperable second factor device by requesting a one time code sent to their email.
    While this is very convenient is has the downside that if a user's email is hacked, their second factor
    is useless to protect their account.

    Default: ``True``

    .. versionadded:: 5.0.0

Unified Signin
--------------

    Unified sign in provides a generalized sign in endpoint that takes an `identity`
    and a `passcode`.

    .. versionadded:: 3.4.0

.. py:data:: SECURITY_UNIFIED_SIGNIN

    To enable this feature - set this to ``True``.

    Default: ``False``

.. py:data:: SECURITY_US_SIGNIN_URL

    Sign in a user with an identity and a passcode.

    Default: ``"/us-signin"``

.. py:data:: SECURITY_US_SIGNIN_SEND_CODE_URL

    Endpoint that given an identity, and a previously setup authentication method, will
    generate and return a one time code. This isn't necessary when using an authenticator
    app.

    Default: ``"/us-signin/send-code"``

.. py:data:: SECURITY_US_SETUP_URL

    Endpoint for setting up and validating SMS or an authenticator app for use in
    receiving one-time codes.

    Default: ``"/us-setup"``

.. py:data:: SECURITY_US_VERIFY_LINK_URL

    This endpoint handles the 'magic link' that is sent when the user requests a code
    via email. It is mostly just accessed via a ``GET`` from an email reader.

    Default: ``"/us-verify-link"``

.. py:data:: SECURITY_US_VERIFY_URL

    This endpoint handles reauthentication, the caller must be already authenticated
    and then enter in their primary credentials (password/passcode) again. This is
    used when an endpoint (such as ``/us-setup``) fails freshness checks.
    This endpoint won't be registered if :py:data:`SECURITY_FRESHNESS` evaluates to < 0.

    Default: ``"/us-verify"``

.. py:data:: SECURITY_US_VERIFY_SEND_CODE_URL

    As part of ``/us-verify``, this endpoint will send the appropriate code.
    This endpoint won't be registered if :py:data:`SECURITY_FRESHNESS` evaluates to < 0.

    Default: ``"/us-verify/send-code"``

.. py:data:: SECURITY_US_POST_SETUP_VIEW

    Specifies the view to redirect to after a user successfully setups an authentication method (non-json).
    This value can be set to a URL or an endpoint name.

    Default: ``".us-setup"``

.. py:data:: SECURITY_US_SIGNIN_TEMPLATE

    Default: ``"security/us_signin.html"``

.. py:data:: SECURITY_US_SETUP_TEMPLATE

    Default: ``"security/us_setup.html"``

.. py:data:: SECURITY_US_VERIFY_TEMPLATE

    Default: ``"security/us_verify.html"``

.. py:data:: SECURITY_US_ENABLED_METHODS

    Specifies the default enabled methods for unified signin authentication.
    Be aware that ``password`` only affects this :data:`SECURITY_US_SIGNIN_URL` endpoint.
    Removing it from here won't stop users from using the :data:`SECURITY_LOGIN_URL` endpoint
    (unless you replace the login endpoint using :py:data:`SECURITY_US_SIGNIN_REPLACES_LOGIN`).

    This config variable defines which methods can be used to provide ``passcode`` data.
    :py:data:`SECURITY_USER_IDENTITY_ATTRIBUTES` defines which user model fields can be used as ``identity``.

    Default: ``["password", "email", "authenticator", "sms"]`` - which are the only supported options.

.. py:data:: SECURITY_US_MFA_REQUIRED

    A list of :data:`SECURITY_US_ENABLED_METHODS` that will require two-factor
    authentication. This is of course dependent on the settings of :py:data:`SECURITY_TWO_FACTOR`
    and :py:data:`SECURITY_TWO_FACTOR_REQUIRED`. Note that even with REQUIRED, only
    methods listed here will trigger a two-factor cycle.

    Default: ``["password", "email"]``.

.. py:data:: SECURITY_US_TOKEN_VALIDITY

    Specifies the number of seconds access token/code is valid.

    Default: ``120``

.. py:data:: SECURITY_US_EMAIL_SUBJECT

    Sets the email subject when sending the verification code via email.

    Default: ``_("Verification Code")``

.. py:data:: SECURITY_US_SETUP_WITHIN

    Specifies the amount of time a user has before their setup
    token expires. Always pluralize the time unit for this value.

    Default: ``"30 minutes"``

.. py:data:: SECURITY_US_SIGNIN_REPLACES_LOGIN

    If set, then the :py:data:`SECURITY_LOGIN_URL` will be registered to the ``us-signin`` endpoint.
    Doing this will mean that logout will properly redirect to the us-signin endpoint.

    Default: ``False``


Additional relevant configuration variables:

    * :py:data:`SECURITY_USER_IDENTITY_ATTRIBUTES` - Defines the order and methods for parsing and validating identity.
    * :py:data:`SECURITY_PASSWORD_REQUIRED` - Can a user register w/o a password?
    * :py:data:`SECURITY_DEFAULT_REMEMBER_ME`
    * :py:data:`SECURITY_SMS_SERVICE` - When SMS is enabled in :py:data:`SECURITY_US_ENABLED_METHODS`.
    * :py:data:`SECURITY_SMS_SERVICE_CONFIG`
    * :py:data:`SECURITY_TOTP_SECRETS`
    * :py:data:`SECURITY_TOTP_ISSUER`
    * :py:data:`SECURITY_PHONE_REGION_DEFAULT`
    * :py:data:`SECURITY_LOGIN_ERROR_VIEW` - The user is redirected here if
      :py:data:`SECURITY_US_VERIFY_LINK_URL` has an error and the request is json and
      :py:data:`SECURITY_REDIRECT_BEHAVIOR` equals ``"spa"``.
    * :py:data:`SECURITY_FRESHNESS` - Used to protect /us-setup.
    * :py:data:`SECURITY_FRESHNESS_GRACE_PERIOD` - Used to protect /us-setup.

Username-Recovery
-----------------

    .. versionadded:: 5.6.0

.. py:data:: SECURITY_USERNAME_RECOVERY

   Specifies whether username recovery is enabled. If set to ``True`` the UserModel
   must contain a column ``"username"``. Note that this feature is independent
   of the :py:data:`SECURITY_USERNAME_ENABLE` feature.

   Default: ``False``.

.. py:data:: SECURITY_USERNAME_RECOVERY_URL

   Specifies the username recovery URL.

   Default: ``"/recover-username"``.

.. py:data:: SECURITY_EMAIL_SUBJECT_USERNAME_RECOVERY

   Sets subject for the username recovery email.

   Default: ``_("Your requested username")``.

.. py:data:: SECURITY_USERNAME_RECOVERY_TEMPLATE

   Specifies the path to the template for the username recovery page.

   Default: ``"security/recover_username.html"``.

Change Username
-----------------

    .. versionadded:: 5.6.0

.. py:data:: SECURITY_CHANGE_USERNAME

   Specifies whether change username feature is enabled.
   This feature should be used in conjunction with
   the :py:data:`SECURITY_USERNAME_ENABLE` feature.

   Default: ``False``.

.. py:data:: SECURITY_CHANGE_USERNAME_URL

   Specifies the change username URL.

   Default: ``"/change-username"``.

.. py:data:: SECURITY_POST_CHANGE_USERNAME_VIEW

    Specifies the view to redirect to after a user successfully changes their username.
    This value can be set to a URL or an endpoint name.
    If this value is ``None``, the user is redirected  to the
    value of :data:`SECURITY_POST_LOGIN_VIEW`.

    Default: ``None``.

.. py:data:: SECURITY_SEND_USERNAME_CHANGE_EMAIL

   If ``True`` then an email will be sent to the registered user upon
   successful change of their username.

   Default: ``True``.

.. py:data:: SECURITY_EMAIL_SUBJECT_USERNAME_CHANGE_NOTICE

   Sets subject for the change username email.

   Default: ``_(""Your username has been changed"")``.

.. py:data:: SECURITY_CHANGE_USERNAME_TEMPLATE

   Specifies the path to the template for the change username page.

   Default: ``"security/change_username.html"``.

Additional relevant configuration variables:

    * :py:data:`SECURITY_FRESHNESS` - Used to protect /change-username.
    * :py:data:`SECURITY_FRESHNESS_GRACE_PERIOD` - Used to protect /change-username.


Passwordless
-------------

This feature is DEPRECATED as of 5.0.0. Please use unified signin feature instead.

.. py:data:: SECURITY_PASSWORDLESS

    Specifies if Flask-Security should enable the passwordless login feature.
    If set to ``True``, users are not required to enter a password to login but are
    sent an email with a login link.
    **This feature is being replaced with a more generalized passwordless feature
    that includes using SMS or authenticator applications for generating codes.**

    Default: ``False``.

.. py:data:: SECURITY_SEND_LOGIN_TEMPLATE

    Specifies the path to the template for the send login instructions page for
    passwordless logins.

    Default:``"security/send_login.html"``.

.. py:data:: SECURITY_EMAIL_SUBJECT_PASSWORDLESS

    Sets the subject for the passwordless feature.

    Default: ``_("Login instructions")``.

.. py:data:: SECURITY_LOGIN_WITHIN

    Specifies the amount of time a user has before a login link expires.
    Always pluralize the time unit for this value.

    Default: ``"1 days"``.

.. py:data:: SECURITY_LOGIN_ERROR_VIEW

    Specifies the view/URL to redirect to after the following login/authentication errors:

    * GET passwordless link where the link is expired/incorrect
    * GET unified sign in magic link when there is an error.
    * GET on oauthresponse where there was an OAuth protocol error.
    * GET on oauthresponse where the returned identity isn't registered.

    This is only valid if :py:data:`SECURITY_REDIRECT_BEHAVIOR` == ``"spa"``.
    Query params in the redirect will contain the error.

    Default: ``None``.

Trackable
----------
.. py:data:: SECURITY_TRACKABLE

    Specifies if Flask-Security should track basic user login statistics. If set to ``True``, ensure your
    models have the required fields/attributes and make sure to commit changes after calling
    ``login_user``. Be sure to use `ProxyFix <https://werkzeug.palletsprojects.com/en/stable/middleware/proxy_fix/>`_ if you are using a proxy.

    Default: ``False``

WebAuthn
--------------

    .. versionadded:: 5.0.0

.. py:data:: SECURITY_WEBAUTHN

    To enable this feature - set this to ``True``. Please see :ref:`models_topic` for
    required additions to your database models.

    Default: ``False``

.. py:data:: SECURITY_WAN_REGISTER_URL

    Endpoint for registering WebAuthn credentials/passkeys.

    Default: ``"/wan-register"``

.. py:data:: SECURITY_WAN_SIGNIN_URL

    Endpoint for signing in using a WebAuthn credential/passkey.

    Default: ``"/wan-signin"``

.. py:data:: SECURITY_WAN_DELETE_URL

    Endpoint for removing a WebAuthn credential/passkey.

    Default: ``"/wan-delete"``

.. py:data:: SECURITY_WAN_VERIFY_URL

    Endpoint for reauthenticating using a WebAuthn credential/passkey.

    Default: ``"/wan-verify"``

.. py:data:: SECURITY_WAN_POST_REGISTER_VIEW

    Specifies the view to redirect to after a user successfully registers a new WebAuthn credential/passkey (non-json).
    This value can be set to a URL or an endpoint name.

    Default: ``".wan-register"``

.. py:data:: SECURITY_WAN_REGISTER_TEMPLATE

    Default: ``"security/wan_register.html"``

.. py:data:: SECURITY_WAN_SIGNIN_TEMPLATE

    Default: ``"security/wan_signin.html"``

.. py:data:: SECURITY_WAN_VERIFY_TEMPLATE

    Default: ``"security/wan_verify.html"``


.. py:data:: SECURITY_WAN_RP_NAME

    The Relying Party (that's us!) name passed as part of credential
    creation. Defined in the `spec <https://www.w3.org/TR/2021/REC-webauthn-2-20210408/#dictionary-pkcredentialentity>`_.

    Default: ``"My Flask App"``

.. py:data:: SECURITY_WAN_REGISTER_WITHIN

    Specifies the amount of time a user has before their register
    token expires. Always pluralize the time unit for this value.

    Default: ``"30 minutes"``

.. py:data:: SECURITY_WAN_REGISTER_TIMEOUT

    Specifies the timeout that is passed as part of PublicKeyCredentialCreationOptions.
    In milliseconds.

    Default: ``60000``

.. py:data:: SECURITY_WAN_SIGNIN_WITHIN

    Specifies the amount of time a user has before their signin
    token expires. Always pluralize the time unit for this value.

    Default: ``"1 minutes"``

.. py:data:: SECURITY_WAN_SIGNIN_TIMEOUT

    Specifies the timeout that is passed as part of PublicKeyCredentialRequestOptions.
    In milliseconds.

    Default: ``60000``

.. py:data:: SECURITY_WAN_ALLOW_AS_FIRST_FACTOR

    If True then a WebAuthn credential/passkey may be registered for use as the first (or only)
    authentication factor. This will set the default ``AuthenticatorSelectionCriteria``
    to require a cross-platform key.

    Default: ``True``

.. py:data:: SECURITY_WAN_ALLOW_AS_MULTI_FACTOR

    If True then a WebAuthn credential/passkey can be used
    as both a primary and a secondary factor. This requires that the key
    supports 'UserVerification'.

    Default: ``True``

.. py:data:: SECURITY_WAN_ALLOW_USER_HINTS

    If True then an unauthenticated user can request a list of registered
    WebAuthn credentials/passkeys. This allows the use of non-resident (non-discoverable)
    keys, but has the possible security concern that it allows 'user discovery'.
    Look at https://www.w3.org/TR/2021/REC-webauthn-2-20210408/#sctn-username-enumeration
    for a good writeup.

    If this is ``False`` and :py:data:`SECURITY_WAN_ALLOW_AS_FIRST_FACTOR` is ``True``
    (the default) then by default, ``AuthenticatorSelectionCriteria`` will be set
    to require a Resident key.

    Default: ``True``

.. py:data:: SECURITY_WAN_ALLOW_AS_VERIFY

    Sets which type of WebAuthn security credential, if any, may be used for
    reauthentication/verify events. This is a list with possible values:

        - ``"first"`` - just credentials/passkeys registered as "first" usage are allowed
        - ``"secondary"`` - just credentials/passkeys registered as "secondary" are allowed

    If list is empty or ``None`` WebAuthn credentials/passkeys aren't allowed. This also means that the
    :py:data:`SECURITY_WAN_VERIFY_URL` endpoint won't be registered.

    Default: ``["first", "secondary"]``


Additional relevant configuration variables:

    * :py:data:`SECURITY_FRESHNESS` - Used to protect /wan-register and /wan-delete.
    * :py:data:`SECURITY_FRESHNESS_GRACE_PERIOD` - Used to protect /wan-register and /wan-delete.

Recovery Codes
--------------

    .. versionadded:: 5.0.0

.. py:data:: SECURITY_MULTI_FACTOR_RECOVERY_CODES

    To enable this feature - set this to ``True``. Please see :ref:`models_topic` for
    required additions to your database models. This enables a user to generate and
    use a recovery code for two-factor authentication. This works for all two-factor
    mechanisms - including WebAuthn. Note that these code are single use and
    the user should be advised to write them down and store in a safe place.

.. py:data:: SECURITY_MULTI_FACTOR_RECOVERY_CODES_N

    How many recovery codes to generate.

    Default:: ``5``

.. py:data:: SECURITY_MULTI_FACTOR_RECOVERY_CODES_URL

    Endpoint for displaying and generating recovery codes.

    Default: ``"/mf-recovery-codes"``

.. py:data:: SECURITY_MULTI_FACTOR_RECOVERY_CODES_TEMPLATE

    Default: ``"security/mf_recovery_codes.html"``

.. py:data:: SECURITY_MULTI_FACTOR_RECOVERY_URL

    Endpoint for entering a recovery code.

    Default: ``"/mf-recovery"``

.. py:data:: SECURITY_MULTI_FACTOR_RECOVERY_TEMPLATE

    Default: ``"security/mf_recovery.html"``

.. py:data:: SECURITY_MULTI_FACTOR_RECOVERY_CODES_KEYS

    A list of keys used to encrypt the recovery codes at rest (i.e. in the database).
    The default implementation uses cryptography.fernet (https://cryptography.io/en/latest/fernet/#cryptography.fernet.Fernet)
    - so the keys should be generated by::

        from cryptography.fernet import Fernet
        key = Fernet.generate_key()

    Multiple keys can be configured allowing for key rotation.

    Default: ``None`` - recovery codes will NOT be encrypted on disk

    .. versionadded:: 5.1.0

.. py:data:: SECURITY_MULTI_FACTOR_RECOVERY_CODE_TTL

    An integer passed to decrypt specifying the maximum age of the code.

    Default: ``None`` - no TTL will be enforced.

    .. versionadded:: 5.1.0

Additional relevant configuration variables:

    * :py:data:`SECURITY_FRESHNESS` - Used to protect /mf-recovery-codes.
    * :py:data:`SECURITY_FRESHNESS_GRACE_PERIOD` - Used to protect /mf-recovery-codes.
    * :py:data:`SECURITY_TOTP_SECRETS` - TOTP/passlib is used to generate the codes.
    * :py:data:`SECURITY_TOTP_ISSUER`

Social Oauth
-------------
    .. versionadded:: 5.1.0

.. py:data:: SECURITY_OAUTH_ENABLE

    To enable using external Oauth providers - set this to ``True``.

.. py:data:: SECURITY_OAUTH_BUILTIN_PROVIDERS

    A list of built-in providers to register.

    Default: ``["google", "github"]``

.. py:data:: SECURITY_OAUTH_START_URL

    Endpoint for starting an Oauth authentication operation.

    Default: ``"/login/oauthstart"``

.. py:data:: SECURITY_OAUTH_RESPONSE_URL

    Endpoint used as Oauth redirect.

    Default: ``"/login/oauthresponse"``

.. py:data:: SECURITY_POST_OAUTH_LOGIN_VIEW

    Specifies the view/URL to redirect to after a successful authentication (login)
    using social oauth.
    This is only valid if :py:data:`SECURITY_REDIRECT_BEHAVIOR` == ``"spa"``.
    Query params in the redirect will contain `identity` and `email`.

    Default: ``None``.

    .. versionadded:: 5.4.0



Feature Flags
-------------
All feature flags. By default all are ``False``/not enabled.

* :py:data:`SECURITY_CHANGE_EMAIL`
* :py:data:`SECURITY_CHANGE_USERNAME`
* :py:data:`SECURITY_CONFIRMABLE`
* :py:data:`SECURITY_REGISTERABLE`
* :py:data:`SECURITY_RECOVERABLE`
* :py:data:`SECURITY_TRACKABLE`
* :py:data:`SECURITY_PASSWORDLESS`
* :py:data:`SECURITY_CHANGEABLE`
* :py:data:`SECURITY_TWO_FACTOR`
* :py:data:`SECURITY_UNIFIED_SIGNIN`
* :py:data:`SECURITY_USERNAME_RECOVERY`
* :py:data:`SECURITY_WEBAUTHN`
* :py:data:`SECURITY_MULTI_FACTOR_RECOVERY_CODES`
* :py:data:`SECURITY_OAUTH_ENABLE`

URLs and Views
--------------
A list of all URLs and Views:

* :py:data:`SECURITY_LOGIN_URL` ``"/login"``
* :py:data:`SECURITY_LOGOUT_URL` ``"/logout"``
* :py:data:`SECURITY_VERIFY_URL` ``"/verify"``
* :py:data:`SECURITY_REGISTER_URL` ``"/register"``
* :py:data:`SECURITY_CHANGE_EMAIL_URL` ``"change-email"``
* :py:data:`SECURITY_CHANGE_EMAIL_CONFIRM_URL` ``"/change-email-confirm"``
* :py:data:`SECURITY_CHANGE_USERNAME_URL` ``"change-username"``
* :py:data:`SECURITY_RESET_URL` ``"/reset"``
* :py:data:`SECURITY_CHANGE_URL` ``"/change"``
* :py:data:`SECURITY_CONFIRM_URL` ``"/confirm"``
* :py:data:`SECURITY_MULTI_FACTOR_RECOVERY_CODES_URL` ``"/mf-recovery-codes"``
* :py:data:`SECURITY_MULTI_FACTOR_RECOVERY_URL` ``"/mf-recovery"``
* :py:data:`SECURITY_OAUTH_START_URL` ``"/login/oauthstart"``
* :py:data:`SECURITY_OAUTH_RESPONSE_URL` ``"/login/oauthresponse"``
* :py:data:`SECURITY_TWO_FACTOR_SELECT_URL` ``"/tf-select"``
* :py:data:`SECURITY_TWO_FACTOR_SETUP_URL` ``"/tf-setup"``
* :py:data:`SECURITY_TWO_FACTOR_TOKEN_VALIDATION_URL` ``"/tf-validate"``
* :py:data:`SECURITY_TWO_FACTOR_RESCUE_URL` ``"/tf-rescue"``
* :py:data:`SECURITY_TWO_FACTOR_ERROR_VIEW`
* :py:data:`SECURITY_TWO_FACTOR_POST_SETUP_VIEW`
* :py:data:`SECURITY_POST_LOGIN_VIEW`
* :py:data:`SECURITY_POST_LOGOUT_VIEW`
* :py:data:`SECURITY_CONFIRM_ERROR_VIEW`
* :py:data:`SECURITY_POST_REGISTER_VIEW`
* :py:data:`SECURITY_POST_CONFIRM_VIEW`
* :py:data:`SECURITY_POST_RESET_VIEW`
* :py:data:`SECURITY_POST_CHANGE_VIEW`
* :py:data:`SECURITY_POST_OAUTH_LOGIN_VIEW`
* :py:data:`SECURITY_UNAUTHORIZED_VIEW`
* :py:data:`SECURITY_RESET_VIEW`
* :py:data:`SECURITY_RESET_ERROR_VIEW`
* :py:data:`SECURITY_LOGIN_ERROR_VIEW`
* :py:data:`SECURITY_USERNAME_RECOVERY_URL`
* :py:data:`SECURITY_US_SIGNIN_URL`
* :py:data:`SECURITY_US_SETUP_URL`
* :py:data:`SECURITY_US_SIGNIN_SEND_CODE_URL`
* :py:data:`SECURITY_US_VERIFY_LINK_URL`
* :py:data:`SECURITY_US_VERIFY_URL`
* :py:data:`SECURITY_US_VERIFY_SEND_CODE_URL`
* :py:data:`SECURITY_US_POST_SETUP_VIEW`
* :py:data:`SECURITY_WAN_REGISTER_URL`
* :py:data:`SECURITY_WAN_SIGNIN_URL`
* :py:data:`SECURITY_WAN_DELETE_URL`
* :py:data:`SECURITY_WAN_VERIFY_URL`
* :py:data:`SECURITY_WAN_POST_REGISTER_VIEW`

Template Paths
--------------
A list of all templates:

* :py:data:`SECURITY_FORGOT_PASSWORD_TEMPLATE`
* :py:data:`SECURITY_LOGIN_USER_TEMPLATE`
* :py:data:`SECURITY_VERIFY_TEMPLATE`
* :py:data:`SECURITY_REGISTER_USER_TEMPLATE`
* :py:data:`SECURITY_RESET_PASSWORD_TEMPLATE`
* :py:data:`SECURITY_CHANGE_PASSWORD_TEMPLATE`
* :py:data:`SECURITY_CHANGE_EMAIL_TEMPLATE`
* :py:data:`SECURITY_CHANGE_USERNAME_TEMPLATE`
* :py:data:`SECURITY_MULTI_FACTOR_RECOVERY_TEMPLATE`
* :py:data:`SECURITY_MULTI_FACTOR_RECOVERY_CODES_TEMPLATE`
* :py:data:`SECURITY_SEND_CONFIRMATION_TEMPLATE`
* :py:data:`SECURITY_SEND_LOGIN_TEMPLATE`
* :py:data:`SECURITY_TWO_FACTOR_VERIFY_CODE_TEMPLATE`
* :py:data:`SECURITY_TWO_FACTOR_SELECT_TEMPLATE`
* :py:data:`SECURITY_TWO_FACTOR_SETUP_TEMPLATE`
* :py:data:`SECURITY_USERNAME_RECOVERY_TEMPLATE`
* :py:data:`SECURITY_US_SIGNIN_TEMPLATE`
* :py:data:`SECURITY_US_SETUP_TEMPLATE`
* :py:data:`SECURITY_US_VERIFY_TEMPLATE`
* :py:data:`SECURITY_WAN_REGISTER_TEMPLATE`
* :py:data:`SECURITY_WAN_SIGNIN_TEMPLATE`
* :py:data:`SECURITY_WAN_VERIFY_TEMPLATE`

Messages
-------------

The following are the messages Flask-Security uses.  They are tuples; the first
element is the message and the second element is the error level.

The default messages and error levels can be found in ``core.py``.

* ``SECURITY_MSG_ALREADY_CONFIRMED``
* ``SECURITY_MSG_API_ERROR``
* ``SECURITY_MSG_ANONYMOUS_USER_REQUIRED``
* ``SECURITY_MSG_CHANGE_EMAIL_EXPIRED``
* ``SECURITY_MSG_CHANGE_EMAIL_CONFIRMED``
* ``SECURITY_MSG_CHANGE_EMAIL_SENT``
* ``SECURITY_MSG_CODE_HAS_BEEN_SENT``
* ``SECURITY_MSG_CONFIRMATION_EXPIRED``
* ``SECURITY_MSG_CONFIRMATION_REQUEST``
* ``SECURITY_MSG_CONFIRMATION_REQUIRED``
* ``SECURITY_MSG_CONFIRM_REGISTRATION``
* ``SECURITY_MSG_DISABLED_ACCOUNT``
* ``SECURITY_MSG_EMAIL_ALREADY_ASSOCIATED``
* ``SECURITY_MSG_EMAIL_CONFIRMED``
* ``SECURITY_MSG_EMAIL_NOT_PROVIDED``
* ``SECURITY_MSG_FAILED_TO_SEND_CODE``
* ``SECURITY_MSG_FORGOT_PASSWORD``
* ``SECURITY_MSG_GENERIC_AUTHN_FAILED``
* ``SECURITY_MSG_GENERIC_RECOVERY``
* ``SECURITY_MSG_GENERIC_US_SIGNIN``
* ``SECURITY_MSG_IDENTITY_ALREADY_ASSOCIATED``
* ``SECURITY_MSG_IDENTITY_NOT_REGISTERED``
* ``SECURITY_MSG_INVALID_CODE``
* ``SECURITY_MSG_INVALID_CONFIRMATION_TOKEN``
* ``SECURITY_MSG_INVALID_EMAIL_ADDRESS``
* ``SECURITY_MSG_INVALID_LOGIN_TOKEN``
* ``SECURITY_MSG_INVALID_PASSWORD``
* ``SECURITY_MSG_INVALID_PASSWORD_CODE``
* ``SECURITY_MSG_INVALID_RECOVERY_CODE``
* ``SECURITY_MSG_INVALID_REDIRECT``
* ``SECURITY_MSG_INVALID_RESET_PASSWORD_TOKEN``
* ``SECURITY_MSG_LOGIN``
* ``SECURITY_MSG_LOGIN_EMAIL_SENT``
* ``SECURITY_MSG_LOGIN_EXPIRED``
* ``SECURITY_MSG_NO_RECOVERY_CODES_SETUP``
* ``SECURITY_MSG_OAUTH_HANDSHAKE_ERROR``
* ``SECURITY_MSG_PASSWORDLESS_LOGIN_SUCCESSFUL``
* ``SECURITY_MSG_PASSWORD_BREACHED``
* ``SECURITY_MSG_PASSWORD_BREACHED_SITE_ERROR``
* ``SECURITY_MSG_PASSWORD_CHANGE``
* ``SECURITY_MSG_PASSWORD_INVALID_LENGTH``
* ``SECURITY_MSG_PASSWORD_IS_THE_SAME``
* ``SECURITY_MSG_PASSWORD_MISMATCH``
* ``SECURITY_MSG_PASSWORD_NOT_PROVIDED``
* ``SECURITY_MSG_PASSWORD_REQUIRED``
* ``SECURITY_MSG_PASSWORD_RESET``
* ``SECURITY_MSG_PASSWORD_RESET_EXPIRED``
* ``SECURITY_MSG_PASSWORD_RESET_NO_LOGIN``
* ``SECURITY_MSG_PASSWORD_RESET_REQUEST``
* ``SECURITY_MSG_PASSWORD_TOO_SIMPLE``
* ``SECURITY_MSG_PHONE_INVALID``
* ``SECURITY_MSG_REAUTHENTICATION_REQUIRED``
* ``SECURITY_MSG_REAUTHENTICATION_SUCCESSFUL``
* ``SECURITY_MSG_REFRESH``
* ``SECURITY_MSG_RETYPE_PASSWORD_MISMATCH``
* ``SECURITY_MSG_TWO_FACTOR_INVALID_TOKEN``
* ``SECURITY_MSG_TWO_FACTOR_LOGIN_SUCCESSFUL``
* ``SECURITY_MSG_TWO_FACTOR_CHANGE_METHOD_SUCCESSFUL``
* ``SECURITY_MSG_TWO_FACTOR_PERMISSION_DENIED``
* ``SECURITY_MSG_TWO_FACTOR_METHOD_NOT_AVAILABLE``
* ``SECURITY_MSG_TWO_FACTOR_SETUP_EXPIRED``
* ``SECURITY_MSG_TWO_FACTOR_DISABLED``
* ``SECURITY_MSG_UNAUTHORIZED``
* ``SECURITY_MSG_UNAUTHENTICATED``
* ``SECURITY_MSG_US_METHOD_NOT_AVAILABLE``
* ``SECURITY_MSG_US_SETUP_EXPIRED``
* ``SECURITY_MSG_US_SETUP_SUCCESSFUL``
* ``SECURITY_MSG_US_SPECIFY_IDENTITY``
* ``SECURITY_MSG_USE_CODE``
* ``SECURITY_MSG_USER_DOES_NOT_EXIST``
* ``SECURITY_MSG_USERNAME_CHANGE``
* ``SECURITY_MSG_USERNAME_INVALID_LENGTH``
* ``SECURITY_MSG_USERNAME_ILLEGAL_CHARACTERS``
* ``SECURITY_MSG_USERNAME_DISALLOWED_CHARACTERS``
* ``SECURITY_MSG_USERNAME_NOT_PROVIDED``
* ``SECURITY_MSG_USERNAME_ALREADY_ASSOCIATED``
* ``SECURITY_MSG_USERNAME_RECOVERY_REQUEST``
* ``SECURITY_MSG_WEBAUTHN_EXPIRED``
* ``SECURITY_MSG_WEBAUTHN_NAME_REQUIRED``
* ``SECURITY_MSG_WEBAUTHN_NAME_INUSE``
* ``SECURITY_MSG_WEBAUTHN_NAME_NOT_FOUND``
* ``SECURITY_MSG_WEBAUTHN_CREDENTIAL_DELETED``
* ``SECURITY_MSG_WEBAUTHN_REGISTER_SUCCESSFUL``
* ``SECURITY_MSG_WEBAUTHN_CREDENTIAL_ID_INUSE``
* ``SECURITY_MSG_WEBAUTHN_UNKNOWN_CREDENTIAL_ID``
* ``SECURITY_MSG_WEBAUTHN_ORPHAN_CREDENTIAL_ID``
* ``SECURITY_MSG_WEBAUTHN_NO_VERIFY``
* ``SECURITY_MSG_WEBAUTHN_CREDENTIAL_WRONG_USAGE``
* ``SECURITY_MSG_WEBAUTHN_MISMATCH_USER_HANDLE``

.. _passlib's CryptoContext: https://passlib.readthedocs.io/en/stable/lib/passlib.context.html
